DAKboard CPU & Wall Display

A "No Signal" Message Appears Momentarily, Then Just A Black Screen
If you're seeing a "No Signal" message that appears momentarily on your DAKboard Wall Display (v2, v2-plus), the Wall Display may be set to t...
Wed, 6 Mar, 2019 at 12:15 PM
Rotate a Display to Portrait or Landscape
To change your DAKboard display's orientation, first make sure your custom screen orientation is set correctly (if using a custom screen): In the D...
Fri, 1 Nov, 2019 at 2:00 PM
How to set the sleep schedule
You can set a sleep schedule for your DAKboard Wall Display (and a DAKboard CPU) to turn on and off at designated times.  Sleep schedules work with most mod...
Tue, 23 Feb, 2021 at 4:36 PM
How to set the Timezone
There are a few different places to check if your date/time is wrong, or calendar events are showing up with the wrong time.  On a DAKboard Display o...
Fri, 22 Nov, 2019 at 9:06 AM
Fix incorrect date/time (Connection is not private error)
When a Wall Display or CPU has been powered off, or disconnected from the internet for a length of time, the internal clock may gain, or lose time. And when...
Thu, 11 Apr, 2019 at 2:39 PM
Display Resolution Not Correct
If your DAKboard Wall Display or CPU screen appears larger than normal or blurry, the resolution may not be set correctly. By default, the resolution is set...
Mon, 2 Dec, 2019 at 12:11 PM
Update Settings Directly on the Device Itself
If you're unable to access the DAKboard settings over the network, you can use a USB keyboard/mouse to access the settings directly on the DAKboard dev...
Wed, 18 Sep, 2019 at 4:54 PM
Reset your DAKboard Wall Display or CPU
If you're looking to remove all information (AKA factory reset) from a DAKboard Wall Display or a DAKboard CPU, follow the instructions below. R...
Tue, 31 Aug, 2021 at 9:08 AM
Wrong Screen Showing on DAKboard Wall Display or CPU
If you're not seeing the proper screen on your DAKboard Wall Display or CPU, there are a few things to check and confirm.  Assign the Desired Sc...
Thu, 19 Dec, 2019 at 10:57 AM